search cancel

Do not see data for Card Metrics when first value selected for card metrics is either zero (0) or less then 1000.

book

Article ID: 188835

calendar_today

Updated On:

Products

Clarity PPM On Premise

Issue/Introduction

Do not see data for Card Metrics when first value selected for card metrics is either zero (0) or less then 1000.

Cause

STEPS TO REPRODUCE: 

1. Login to Modern UX
2. Navigate to Ideas
3. Click on View Options and select below for CARD FIELDS and CARD METRICS
 a. Budgeted NPV
 b. Budgeted Operating Cost
4. First update values for Budgeted NPV and Budgeted Operating Cost to 5000 each, observe metrics displayed as 5k for both
5. Now update Budgeted NPV to something less than 1000 or zero (0), notice CARD METRICS did not update.
6. Click refresh and now you don't see any value for Budgeted NPV or Budgeted Operating Cost
7. Another note if I put 1500 for Budgeted NPV it is displaying as 2k, customer would expect to see 1.5k

Expected Results: You should see both values for Budgeted NPV and Budgeted Operating Cost and they should also update when user changes to something less than 1000.

Actual Results: You don't see values for Budgeted NPV and Budgeted Operating Cost

Environment

Release : 15.7.1

Component : CA PPM PROJECT MANAGEMENT

Resolution

Defect DE54429, not reproducible in 15.8.