There is no option to modify the interfaces speed in and speed out

Products

• CA Infrastructure Management
• CA Performance Management - Usage and Administration
• DX NetOps

Issue/Introduction

The customer needs to Modify Interface Speed Overrides as is described on Guide:

https://techdocs.broadcom.com/content/broadcom/techdocs/us/en/ca-enterprise-software/it-operations-management/performance-management/3-7/using/context-pages.html#concept.dita_97e8bb96b2f771c9e666d1d8b0c5e85cdc646f66_EditItemProperties

 

Environment

PM Release : 3.7

Cause

The Details tabs does not exit

Resolution

Override Speed In and Speed Out Values on DA, see as on site:
https://techdocs.broadcom.com/content/broadcom/techdocs/us/en/ca-enterprise-software/it-operations-management/performance-management/3-6/building/manage-interfaces/override-speed-in-and-speed-out-values-on-interfaces.html

Or

 

On CAPC web Page select the Interface ad and in any option selects "Restore Tabs to Defaults"

 

 

And now you can see the "Details" option and you can Edit properties: