ALERT: Some images may not load properly within the Knowledge Base Article. If you see a broken image, please right-click and select 'Open image in a new tab'. We apologize for this inconvenience.
CA IDMS IDMSTABX 0226 error status after job abended
Article ID: 186571
Updated On:
Products
IDMS
IDMS - Database
IDMS - ADS
Issue/Introduction
CA IDMS MAINTAIN INDEX to rebuild an index abended. In this case the job failed with a S2F3 system abend because an IPL was done while the job was running.
A second attempt to rebuild the index fails with 0226 error status in IDMSTABX.
UT012001 IDMSTABX RELEASE 18.5 TAPE GJI50B STARTED
PROGRAM NAME ----- IDMSTABX
ERROR STATUS ----- 0226
ERROR RECORD -----
ERROR SET -------- IX-SET
ERROR AREA ------- IX-AREA
A second attempt to rebuild the index fails with 0226 error status in IDMSTABX.
UT012001 IDMSTABX RELEASE 18.5 TAPE GJI50B STARTED
PROGRAM NAME ----- IDMSTABX
ERROR STATUS ----- 0226
ERROR RECORD -----
ERROR SET -------- IX-SET
ERROR AREA ------- IX-AREA
Environment
Release : 18.5, 19.0
Component : CA ADS
Resolution
Error status 0226 means there is a broken chain. Since it occurs in the rebuild index then it is in the SR8 structure.
Doing an IPL while the MAINTAIN INDEX was running has corrupted the SR8 structure in the index area.
The index for this set is in it's own area so to recover:
Doing an IPL while the MAINTAIN INDEX was running has corrupted the SR8 structure in the index area.
The index for this set is in it's own area so to recover:
- Run a FORMAT on the index area
- Run a MAINTAIN INDEX BUILD or REBUILD FROM=MEMBERS
Additional Information
See documentation on Error Status 0226
Feedback
Yes
No
Powered by
