ALERT: Some images may not load properly within the Knowledge Base Article. If you see a broken image, please right-click and select 'Open image in a new tab'. We apologize for this inconvenience.

CSV export of a list of IP addresses from MTP is not filtering to only the selected IP Addresses.

book

Article ID: 186514

calendar_today

Updated On:

Products

CA Application Delivery Analysis MTP (NetQoS / ADA) CA Application Delivery Analysis (NetQoS / ADA) APPLICATION DELIVERY ANALYSIS SUPERAGENT Activator

Issue/Introduction

When exporting a csv file from an MTP and creating a filter on the MTP and when I do an export it exports everything not what is in the filter.

 

Environment

Release : 11.0.2

Component : NQSAMP - NETQOS SA MULTI-PORT COLLECTOR

Resolution

If you manually edit the filters to have comma separated IP addresses as documented in the link and examples below, it should filter to only the addresses you select.



https://techdocs.broadcom.com/content/broadcom/techdocs/us/en/ca-enterprise-software/it-operations-management/virtual-multi-port-monitor/11-0-2/using/using-filters-to-customize-data-in-the-display-area/analysis-filters/creating-an-analysis-filter.html

  • Client Network Name
     
    Filter for the name of a client network, or a comma-separated list of networks that are defined for monitoring in CA Application Delivery Analysis.
  • Host
     
    Filter for an IP address. The default filter parameter in any combination of the following formats:
     
     
  • One IP address
  •  
  • A range of IP addresses
  •  
  • A comma-separated list of IP addresses
  •  
  • A comma-separated list of address ranges
  •  
    Use hyphens but no spaces in address ranges. For example:
    198.168.0.1,198.165.0.1-198.165.1.255