ALERT: Some images may not load properly within the Knowledge Base Article. If you see a broken image, please right-click and select 'Open image in a new tab'. We apologize for this inconvenience.
DB2 PROBE HIGH MEMORY UTILIZATION ISSUE
Article ID: 186414
Updated On:
Products
DX Unified Infrastructure Management (Nimsoft / UIM)
Issue/Introduction
We have configured database profile in db2 probe.And db2_monitor process on servers taking high memory utilization on servers.
Environment
Release : 8.51
Component : UIM - DB2
Resolution
This is a known issue with the DB2 library and is outside the scope of Broadcom to resolve:
https://techdocs.broadcom.com/content/broadcom/techdocs/us/en/ca-enterprise-software/it-operations-management/ca-unified-infrastructure-management-probes/GA/alphabetical-probe-articles/db2-db2-database-monitoring/db2-db2-database-monitoring-release-notes.html#concept.dita_c1888c8db62ebb31dc75e36e130dd5330e79dcbc_KnownIssues
Memory Leak on Connecting to the DB2 Server: A memory leak is observed when the probe connects to the db2 server. This is a known issue with the db2 library.
https://techdocs.broadcom.com/content/broadcom/techdocs/us/en/ca-enterprise-software/it-operations-management/ca-unified-infrastructure-management-probes/GA/alphabetical-probe-articles/db2-db2-database-monitoring/db2-db2-database-monitoring-release-notes.html#concept.dita_c1888c8db62ebb31dc75e36e130dd5330e79dcbc_KnownIssues
Memory Leak on Connecting to the DB2 Server: A memory leak is observed when the probe connects to the db2 server. This is a known issue with the db2 library.
Feedback
Yes
No
Powered by
