ALERT: Some images may not load properly within the Knowledge Base Article. If you see a broken image, please right-click and select 'Open image in a new tab'. We apologize for this inconvenience.
Spectrum showing overcapacity alarms with dump files show adjacency updates
Article ID: 185773
Updated On:
Products
CA Spectrum
CA eHealth
Issue/Introduction
CPU Over Capacity Alarms are happening regularly in Spectrum.
Dump file stacks are showing adjacency updates happening frequently.
Dump file stacks are showing adjacency updates happening frequently.
Resolution
Customer has Overcapacity alarms turned on.
The stacks were showing adjacency updates happening.
Made adjustments to settings already in place.
We can lower max_update_adjacencies_per_batch from 3 to 2.
And increase update_adjacency_thread_priority from 60 to 70.
Add these settings to the .vnmrc file.
When you turn on the over capacity alarms all it takes is a CPU spike to trigger them.
A CPU spike isn't overly a bad thing, either. But the alarm will trigger anyways.
The stacks were showing adjacency updates happening.
Made adjustments to settings already in place.
We can lower max_update_adjacencies_per_batch from 3 to 2.
And increase update_adjacency_thread_priority from 60 to 70.
Add these settings to the .vnmrc file.
When you turn on the over capacity alarms all it takes is a CPU spike to trigger them.
A CPU spike isn't overly a bad thing, either. But the alarm will trigger anyways.
Feedback
Yes
No
Powered by
