ALERT: Some images may not load properly within the Knowledge Base Article. If you see a broken image, please right-click and select 'Open image in a new tab'. We apologize for this inconvenience.
Can you alarm on a device if the configuration hasn't been changed in X number of days.
Article ID: 185638
Updated On:
Products
CA Spectrum
Issue/Introduction
Is there a way in Spectrum to create an event or an alarm if the device configuration has not changed for X number of days.
Cause
The password on the devices need to be changed every 90 days and the customer wanted to know if there was a way to do this in Spectrum.
Environment
Release : 10.3
Component : SPCAEM
Resolution
The customer can setup a NCM Policy in Spectrum to look for the current password in the device configuration and generate an alarm if the configuration doesn't have that line. See the following documentation on how to create a NCM Policy in Spectrum:
https://techdocs.broadcom.com/content/broadcom/techdocs/us/en/ca-enterprise-software/it-operations-management/spectrum/10-3-2/managing-network/network-configuration-manager/network-configuration-manager-policies.html#concept.dita_d4b989bdf6dc3a123802f445a9dc7d2d3d15a5f8_CreateaPolicy
https://techdocs.broadcom.com/content/broadcom/techdocs/us/en/ca-enterprise-software/it-operations-management/spectrum/10-3-2/managing-network/network-configuration-manager/network-configuration-manager-policies.html#concept.dita_d4b989bdf6dc3a123802f445a9dc7d2d3d15a5f8_CreateaPolicy
Feedback
Yes
No
Powered by
