OPSMVS R13.5 install using CSM fails with GIM23901E message for module OPHMCBLA

book

Article ID: 185591

calendar_today

Updated On:

Products

CA OPS/MVS Event Management & Automation

Issue/Introduction

When installing OPSMVS 13.5 gen lvl 0000 using CSM getting the following errors:

IEW2322I 1220  2    NAME OPHMCBLA(R)                       MAX ACCEPTABLE RC=04                                         

IEW2454W 9203 SYMBOL CEEBETBL UNRESOLVED.  NO AUTOCALL (NCAL) SPECIFIED.                                               

IEW2454W 9203 SYMBOL CEEROOTA UNRESOLVED.  NO AUTOCALL (NCAL) SPECIFIED.                                                

IEW2454W 9203 SYMBOL CEESG003 UNRESOLVED.  NO AUTOCALL (NCAL) SPECIFIED.                                               

IEW2454W 9203 SYMBOL traceMsg UNRESOLVED.  NO AUTOCALL (NCAL) SPECIFIED.  NAME SPACE = 3                               

IEW2454W 9203 SYMBOL rxArgc UNRESOLVED.  NO AUTOCALL (NCAL) SPECIFIED.  NAME SPACE = 3                                 

IEW2454W 9203 SYMBOL malloc UNRESOLVED.  NO AUTOCALL (NCAL) SPECIFIED.  NAME SPACE = 3                                 

IEW2454W 9203 SYMBOL strupr UNRESOLVED.  NO AUTOCALL (NCAL) SPECIFIED.  NAME SPACE = 3                                 

IEW2454W 9203 SYMBOL getResponseBuffer UNRESOLVED.  NO AUTOCALL (NCAL) SPECIFIED.  NAME SPACE = 3                      

IEW2454W 9203 SYMBOL HwmcaBuildAttributeId UNRESOLVED.  NO AUTOCALL (NCAL) SPECIFIED.  NAME SPACE = 3                  

IEW2454W 9203 SYMBOL rxSetv UNRESOLVED.  NO AUTOCALL (NCAL) SPECIFIED.  NAME SPACE = 3                                 

IEW2454W 9203 SYMBOL rxEvInt UNRESOLVED.  NO AUTOCALL (NCAL) SPECIFIED.  NAME SPACE = 3                                

IEW2650I 5102 MODULE ENTRY NOT PROVIDED.  ENTRY DEFAULTS TO SECTION CEESTART.   

 

Cause

The actual error is:

IEW2752S D214 A MEMBER NAME WAS SPECIFIED FOR DDNAME HWMCAEXP BUT THE DATA SET IS NOT A PARTITIONED DATA SET.

Environment

Release : 13.5

Component : OPS/MVS

Resolution

The IBM Hardware Management Console Application API sidedeck library USER.HWMCAEXP must be a PDS instead of a sequential file.

This library must contain the member HWMCAAPI with the IMPORT CODE" statements.

Additional Information

Tailor External Library Names