PGP Command Line releases and build numbers

Products

• PGP Command Line

Issue/Introduction

This article shows the relationship between release names and build numbers of PGP Command Line.

PGP Command Line releases are issued at the same time as releases of Symantec Encryption Desktop and the same release name is used. However, maintenance packs for PGP Command Line are only issued when required.

Environment

Symantec PGP Command Line 10.0 and above.

Resolution

The releases and build numbers are as follows. Note if you are not on PGP Command Line 10.5.0, Symantec Encryption urges you to upgrade to continue to receive support.

Release	Build	Date
10.0	674	February 2010
10.2	283	November 2011
10.2 MP1	338	November 2011
10.2.1	54	April 2012
10.3	200	December 2012
10.3 MP1	214	January 2013
10.3.1	12070	September 2013
10.3.2	12260	January 2014
10.3.2 MP1	12268	April 2014
10.3.2 MP2	12274	June 2014
10.3.2 MP3	12281	August 2014
10.3.2 MP7	12292	January 2015
10.3.2 MP9	12316	May 2015
10.3.2 MP11	12339	October 2015
10.3.2 MP12	12343	February 2016
10.4	94	May 2016
10.4 MP1	123	September 2016
10.4.1	18	November 2016
10.4.1 MP1	41	March 2017
10.4.1 MP2	54	August 2017
10.4.2	16	March 2018
10.4.2 MP1	37	August 2018
10.4.2 MP2	61	January 2019
10.4.2 MP4	1254	December 2019
10.5	349	July 2020
10.5 MP1	368	January 2021
10.5 MP2	418	June 2021
10.5 MP3	424	December 2021
10.5.1	27	March 2022
10.5.1 MP1	73	August 2022
10.5.1 MP2	730	July 2023