The ServerRedundancy.FAILOVER_INTERVAL.long Advanced Agent Setting no longer available in DLP 15
search cancel

The ServerRedundancy.FAILOVER_INTERVAL.long Advanced Agent Setting no longer available in DLP 15

book

Article ID: 184306

calendar_today

Updated On:

Products

Data Loss Prevention

Issue/Introduction

The ServerRedundancy.FAILOVER_INTERVAL.long Advanced Agent Setting is no longer available in the DLP 15 Enforce Console. This setting was removed in DLP 15 as it was part of the old endpoint agent communication layer.

Resolution

The following three Advanced Agent Settings have replaced the ServerRedundancy.FAILOVER_INTERVAL.long setting in DLP 15:

  • ServerCommunicator.CONNECT_BACKOFF_DURATION_MULTIPLIER.int
  • ServerCommunicator.INITIAL_CONNECT_BACKOFF_DURATION_SECONDS.int
  • ServerCommunicator.MAX_CONNECT_BACKOFF_DURATION_SECONDS.int

These settings are found in the Enforce Console by navigating to System -> Agents -> Agent -> Agent Configuration. Click on the applicable agent configuration. Click on the Advanced Settings tab.
​Detailed descriptions and default values are available in the Admin Guide and DLP Online Help.