The crash normally occurs immediately after installation. It can happen at other times if the changes mentioned here are reversed. One way to tell if a crash is similar to the crash mentioned here is to look at the NSD file and look at the section stating "Section: System Data -> Environment" and look to see if the items USERDNSDOMAIN=, USERDOMAIN=, USERNAME= exist in that section of the NSD. If these entries do not exist, then the solution here may resolve the issue.
The following can be found on the Domino console upon startup of Mail Security for Domino:
SMSDOM panic number One: Tue Feb 16 12:31:32 2010: SMSDOM Panic: Failed to get number of mail boxes. [Status string: : Name=SmsNotesStatus,Type=STATUS_ERROR,Error=The server is not responding. The server may be down or you may be experiencing network problems. Contact your system administ,[smsnotes::CNotesStats::GetServerStat(sms_char *, sms_char *, sms_char *, sms_char *, size_t)]]
Another SMSDOM Panic listed below shows "Failed to get number of mail boxes" but also has a different error message "Error=ICC library could not be found or initialization failed".
SMSDOM panic number Two: Tue Nov 08 09:24:17 2011: SMSDOM Panic: Failed to get number of mail boxes. [Status string: : Name=SmsNotesStatus,Type=STATUS_ERROR,Error=ICC library could not be found or initialization failed. Please check your configuration.,[smsnotes::CNotesStats::GetServerStat]]
Symantec Mail Security for Domino can have trouble connecting and doing a look-up for a number of mailboxes on a particular server that results in a crash.
Second SMSDOM Panic: Another SMSDOM Panic also references the same "Failed to get number of mail boxes" but has a different error listed in it "Error=ICC Library could not be found or initialization failed". What cause this issue is that the domino_icc folder is missing from the <drive>:\Program Files\IBM\Lotus\Domino folder. There are two ways of fixing this issue. See the Solution section "Steps for fixing the Second SMSDOM Panic".
Follow these steps for the SMSDOM Panic number one.
1. While the server is down, edit the notes.ini file. Remove ntask from the servertasks line. This will prevent SMSDOM from trying to start, and therefore the crash will not occur.
2. Start the Domino server
3. Open a Notes Admin client and then go into the Domino current configuration. Choose the Ports tab and then the Notes Network Ports tab.
4. Change the Net Address to be equal to the server's IP Address. It should look similar to this:
5. Save and close the settings.
6. Shut down the Domino server.
7. Modify the notes.ini file so that ntask is added back to the servertask line. Save and close the notes.ini file.
8. Start the Domino server. If your problem is similar to the issue described the steps above will resolve the issue. If the problem is not resolved, then the problem is different and may need further research.
Steps for fixing SMSDOM Panic number Two.
If an error is still visible when bringing up the Domino Administrator Client then there could be more issues with Domino. Then follow these steps to fix it.
If it's possible to find USERDNSDOMAIN=, USERDOMAIN=, and USERNAME= in the "System Data -> Environment" section of the NSD log for the Domino crash, this is a different issue than the one documented here. Please refer to the following document to collect evidence, then contact Technical Support for additional assistance:
Title: Information to gather after a Notes server crash
If it is not possible to implement the Solution above, an alternate workaround is to revert to the previous installed version of Symantec Mail Security for Domino, which may also require reverting the Domino server to its previously installed version as well. If it is necessary to rollback for this reason, the following combinations are supported:
Windows: SMSDOM 7.5.6 /Domino 8.5 or earlier
AIX: SMSDOM-MPE 3.2.x /Domino 8.02 or earlier
For other confirmed information regarding Domino 8.x support, please see:
Title: Is Domino 8.x supported by Symantec Mail Security for Domino?
About Cluster IP Addresses