Unable to iPXE boot clients but legacy PXE booting works correctly

Products

• Ghost Solution Suite

Issue/Introduction

Booting a client system to an iPXE package is not successful and the following  

Altiris pre-select Automation processing
UD 192.168.x.x .PXE->EB: !PXE at 97F2:0070, entry point at 97F2:0106

UNDI code segment 97F2:5AB0, data segment 91B2:6400 (582-631kB)
UNDI device is PCI 00:19.0, type DIX+802.3
582kB free base memory after PXE unload

iPXE initialising devices . . .  ok

Environment

Ghost Solution Suite 3.x and iPXE server

Cause

WSUS was installed on this server and it modifies the default behavior for all applications running in the default folder set. This modification is detrimental to the GSS webconsole and to iPXE services. 

Resolution

WSUS is not recommended to be installed on the same server as the GSS web console or iPXE components.