ALERT: Some images may not load properly within the Knowledge Base Article. If you see a broken image, please right-click and select 'Open image in a new tab'. We apologize for this inconvenience.

After adding RAID array and running extend_storage, df -h does not show an increase of space

book

Article ID: 172621

calendar_today

Updated On:

Products

Advanced Threat Protection Platform

Issue/Introduction

After installing a new RAID-10 array into an Advanced Threat Protection (ATP) Platform 8880 and running the extend_storage script in the command line interface (CLI), output from the df -h command does not show an increase in free space.

Cause

RAID array issue.

Environment

ATP 8880 (Dell R720) or ATP 8880v2 (Dell R730)

Resolution

Within the DRAC, with the ATP powered up and running, delete the Virtual Drive, then re-create it.

If the delete operation seems to fail, reset the DRAC, then restart the ATP appliance, then delete again.