search cancel

Transfer keyring from one ProxySG to another using Management Center

book

Article ID: 171786

calendar_today

Updated On:

Products

Management Center

Issue/Introduction

To transfer the keyring from one ProxySG to another you need to complete the following steps.

Resolution

 

1. Create Keyring

a. In the WebUI Go to Management Console > Configuration Tab > SSL > Keyrings

b. Click the Create button

c. Type a name in the Keyring Name field (ex: CA_Cert)

d. Click OK (if you leave the default setting of "Do not Show Key Pair" you will not be able to copy this keyring to a new device if you should need to in the future)

 
2. Retrieve private key from proxy SG


a. login to the CLI and type the following commands:

enable
conf t
ssl
view keypair unencrypted
<your keyring-name  (ex: CA_Cert)>

b. save Private Key as a text file to use it later

 

 3. Save SSL certificates that are installed on the source appliance used for decryption or management console, etc. (if private key is Hidden, a new keyring/private key will need to be created)  Note: This can only be done if Show keypair was selected when the keyring was created.

a  In the Management Console, select Configuration > SSL > Keyrings.

b. Click Edit/View.

c. Copy the CSR(if applicable) and Certificate and paste it into a text editor. Make sure that there are no spaces or extra characters. 

 

4. Log in to Management Center and create a script


a. Configuration>Scripts>Add Script>

b.Type a Name

c. Select Type: (Proxy SG or Advanced Gateway)

d. Click “Save”

e. In open editor type in script in this format:

keyring show <your keyring name> eof

<paste here Private Key followed by certificate>
eof

 
See screenshot below as an example:

 

 5. Execute on Device

a. Once you have a script, select “Execute on Device” to push it out to selected Proxy. 
 

Attachments