ALERT: Some images may not load properly within the Knowledge Base Article. If you see a broken image, please right-click and select 'Open image in a new tab'. We apologize for this inconvenience.

Configure VPN/IPsec tunnel with a Cisco 1941


Article ID: 171487


Updated On:


Web Security Service - WSS


When using the Web Security Service solution, one of the most common access methods is the VPN/IPsec tunnel.

On this guide, the Cisco 1941 router configuration will be covered to establish a VPN tunnel to the Web Security Service using a Pre-Shared Key.


Link to guide:

Cisco 1941 Site-to-Site VPN connection setup.