Fail to install static route on the ProxySG

book

Article ID: 170690

calendar_today

Updated On:

Products

ProxySG Software - SGOS

Issue/Introduction

In certain situation where the ProxySG is still in staging mode and administrator is trying to install static route but fail.

Resolution

One possibility here could be because the proxy is not directly connected to the gateway which these static routes is configured. Causing the installation to be rejected.

Example

0:0 - 172.1.100.1
(All other interface are not connected)

Intended static route to be installed but fail.
10.10.10.1 255.255.255.0 172.2.2.1

So in this example as the proxy is not part of 172.1.100.x network the installation of static route would fail. So you got to assign the right IP to the interface prior to installing static route.