Remove the PacketShaper from the PolicyCenter

book

Article ID: 170315

calendar_today

Updated On:

Products

PolicyCenter S-Series PacketShaper S-Series PacketShaper

Issue/Introduction

You want to remove the PacketShaper from the PolicyCenter.

Resolution

To remove the PacketShaper from the PolicyCenter:

  1. Login to the PacketShaper's Command Line Interface via a serial connection or SSH for the PacketShaper that you would like to remove from PolicyCenter.
     
  2. Run the following command on the PacketShaper:

    config unset

    Note: The config unset command removes a PacketShaper unit entry from the PolicyCenter directory server, so that the PacketShaper no longer appears on the PolicyCenter Configurations tab, but allows the unit to retain its last PolicyCenter configuration after it returns to local mode. 
     
  3. Now, login to the Policy Center GUI.
     
  4. Navigate to Configurations tab, make sure to Check Show Unit Configs.
     
  5. Select the PacketShaper name/IP you want to Delete from PolicyCenter.
     
  6. On the right hand side of the page, select the Operations tab.
     
  7. Scroll down to select the Delete Configuration section of the page and click on the Delete... button to delete the desired PacketShaper's configuration from PolicyCenter.