Instructions on adding PacketShaper to PolicyCenter

Article Id: 170314
Status: Published
Updated On: 29-08-2019 10:32
Legacy Id: TECH247887
Products:
PolicyCenter S-Series , PacketShaper S-Series , PacketShaper
Issue/Introduction:

How to add PacketShaper to PolicyCenter using Convert option.

Resolution:

To Add PacketShaper to Policy center with convert option from the PacketShaper GUI:

  1.  Navigate to PacketShaper's Setup Tab
  2.  Select PolicyCenter Access
  3.  Enter the  DS Host:<IP of PolicyCenter>   DS Password:<PC password>   
  4.  Make sure that the CONVERT option is Checked, and Apply changes