Upgrade Management Center in Failover setup

book

Article ID: 169804

calendar_today

Updated On:

Products

Management Center

Issue/Introduction

How to upgrade Management Center (MC) devices in failover setup.

Resolution


Step 1 - Disable Failover and confirm on both devices.

Primary Management center:
Management Center# failover disable
Management Center# failover view

Backup Management center:
Management Center# failover disable
Management Center# failover view

Step 2 - If the system image is hosted on a local HTTP server, then HTTP access needs to be enable on MC.
Management Center# security http enable
HTTP access enabled

Step 3 - Upload the system image to MC that is stored on a local server.  To upgrade using system image from MC itself, please refer to the following article: TECH246551

Management Center# installed-systems add http:///filename.bcsi

Step 4 - Once installed, a restart reboot will load the new system image.
Management Center# restart reboot

Step 5 - Restore Failover on both MC devices.

Primary Management center:
Management Center# failover make-primary
Management Center# failover view

Backup Management center:
Management Center# failover make-secondary
Management Center# failover view