Below is a list of TCP/UDP ports required by Ghost Solution Suite 3.X
Port | Protocol | Use | Bi-Directional |
---|---|---|---|
37 | UDP | Time Sync between server and client | |
49 | UDP | Security/Authentication | |
53 | UDP | Security/Authentication | |
67 | UDP | PXE Server service | X |
68 | UDP | PXE Server service | X |
69 | UDP | PXE Mtftp Server | X |
137,138 | TCP | Netbios/Security | |
402,403 | TCP |
eXpress Server service Dagent communication Client Transfer Port |
X |
405 | TCP | PXE Manager service | X |
406 | TCP |
PXE Config Helper service PXE Manager service |
X |
407 | TCP |
PXE Config Helper service PXE Mtftp service PXE Server service |
X |
415 | ADLagent (Linux agent) | X | |
505 | TCP |
DB Management Service eXpress Server service Win32 Console (Local and Remote) |
X |
1025 to 5000 | TCP | File Transfer (dynamically chosen unless otherwise specified in the product see *note) | X |
1433 | TCP |
eXpress Server service DB Management Service SQL Server communication |
X |
1758,1759, 2070-2073 | UDP (Multicast) | PXE Client | |
4011 | UDP | PXE Server service | |
4949,3829,4950,4951,4952 | PCT Real-time Destination Agents | ||
1345,1346,1347,6666,7777 | UDP | Ghost Multicast (Used by client and Ghostcast Server) | |
5001, 5002 | UDP | Used as Remote Control ports prior to the release of GSS 3.0 | |
4433 | TCP | iPXE - not available before 3.3 |
*Note: To configure the file transfer port, in the Ghost Solution Suite console, to use a specific port, navigate to Tools->Options->Global tab. Check Client/Server file transfer port check-box and set the dedicated port to 403.
TCP port 402 will also need to be enabled on the client firewall. Additional ports may need to be enabled client-side for file transfer and RDP.