Enforce management traffic for PacketShaper S-series to go through management port only.
Article ID: 169225
PolicyCenter S-SeriesPacketShaper S-Series
When the SYS MGMT port is connected to a management network, you may want to enable the Dedicated Management Port option so that the unit cannot be accessed from other networks; this provides increased security. Enabling management port access will cause loss of remote connectivity to the unit through all other ports.
To enforce all management traffic for PacketShaper S-Series to its management port only, issue the command sys set dedicatedMgmtInterface 1
Note: Issue the command sys set dedicatedMgmtInterface 0 to disable dedicated management port access.