Issues Restoring a ProxySG Appliance Configuration via CLI or Blue Coat Director. The following error triggered: % Reserved keyword: CCL names cannot begin with "bluecoat-"

Article Id: 169007

Status: Published

Updated On: 13-05-2017 12:14

Legacy Id: TECH245791

Products:

Asset Management Solution , ProxySG Software - SGOS

Issue/Introduction:

When the Administrator restores the archive configuration to a ProxySG appliance either through the CLI or with the assistance of a Blue Coat Director appliance, the following error may be produced - "% Reserved keyword: CCL names cannot begin with "bluecoat-":

Cause:

This is a known bug (bug#227634) and has been resolved in SGOS version 6.5.8.5 (or above).

Resolution:

An SGOS firmware upgrade is required as a permanent fix. Please upgrade the firmware to SGOS version 6.5.8.5 or later.

Workaround

The workaround is to delete the following from the archive (if it exists) before installing the configuration on the ProxySG:

===================
create ccl bluecoat-appliance
edit ccl bluecoat-appliance ;mode
add BC_Engineering_CA
add ABRCA_root
exit
===================