How to restore the ProxySG 300 appliance to factory defaults using the rear-facing RST button.

book

Article ID: 168721

calendar_today

Updated On:

Products

SG-300 ProxySG Software - SGOS

Issue/Introduction

You can restore the ProxySG 300 appliance to factory defaults using the rear-facing RST button if the appliance is not accessible using the serial console or if you are unable to login to the appliance from the CLI enable mode.

Resolution

To reset the ProxySG 300 appliance to factory defaults using the RST button, hold down the RST button for approximately 5 seconds.
Power LED will be change from green to umber then appliance will reinitialize.

User-added image

Attachments