What are the rear Ethernet port assignments on the DLP1700 appliance?

book

Article ID: 168593

calendar_today

Updated On:

Products

DLP-1700

Issue/Introduction

Data Loss Prevention (DLP) has the following Ethernet port assignments:
ETHERNET PORT    FUNCTION
eth0, eth1Packet Monitoring
Connect to a network TAP for passive TCP traffic inspection.
eth2Management
Connect to a switch for browser-based access to the management console (required).
eth3Email Inspection
Connect to a switch to receive SMTP traffic from a Mail Transfer Agent (MTA).
eth4Web Inspection
Connect to a switch to receive ICAP traffic from a Blue Coat ProxySG.
eth5Central Management
Connect to a switch to off-load or distribute tasks to other DLP appliances.
NOTE: Typically eth4 is connected as the minimum for inspection services.

Resolution

DLP1700 currently ships with the following Ethernet port assignments:
User-added image

Older models of DLP1700 have the following Ethernet port assignments:
User-added image

For additional installation and configuration information, please see the DLP Appliance Administrator's Guide:
https://bto.bluecoat.com/documentation/All-Documents/DLP

Attachments