Problems creating LDAP realm in ProxySG Management Console

Article Id: 168561

Status: Published

Updated On: 13-05-2017 11:49

Legacy Id: TECH245217

Products:

ProxySG Software - SGOS

Issue/Introduction:

If you try to create an LDAP realm using the Management Console without specifying the base DN first, you receive the error:

Invalid base DN. The base DN must contain an '='

This does not affect the command line interface (CLI) because the base DN is optional.

Resolution:

Upgrade to SGOS 6.5.7.1.

Workaround

Specify the base DN first or use the CLI to create the LDAP realm.