How do I reflect client IP in Cacheflow?

book

Article ID: 168217

calendar_today

Updated On:

Products

CacheFlow Appliance Software

Issue/Introduction

Here are the steps to enable client IP reflection in a Cacheflow. This would ensure that all outgoing connection uses the client IP instead of the Cacheflow IP

1) Check the current reflect-client-ip setting:
cacheflow# sh reflect-client-ip
Client IP reflection is disabled


2) To enable, follow the steps below
cacheflow# conf t
Enter configuration commands, one per line.  End with CTRL-Z.
cacheflow#(config) reflect-client-ip enable
  ok
cacheflow#(config) exit


3) Verify that it is now set correctly
cacheflow# sh reflect-client-ip
Client IP reflection is enabled
cacheflow#