"show flow active" format > XOS 9 - TCP States

book

Article ID: 168134

calendar_today

Updated On:

Products

XOS

Issue/Introduction

The output from the CB cli command "show flow active" can contain TCP state information for each flow shown.N/A

Resolution

The output from the CB cli command "show flow active" can contain TCP state information for each flow shown. For example:

CBS# show flow active
Module Source Destination Prot Dom TTI/MAX

np1 10.1.1.25:58714 10.2.1.25:10000 6 1 00:59/01:00
Modules sean_1
rx circuit 1030 Master np1 Fast Path Y TCP state Validation pending rx packets 1

np1 10.1.1.25:58695 10.2.1.25:10000 6 1 00:00/10:00
Modules sean_2
rx circuit 1030 Master np1 Fast Path N TCP state Validated rx packets 12

np1 10.1.1.25:58707 10.2.1.25:10000 6 1 10:00/10:00
Modules sean_2
rx circuit 1030 Master np1 Fast Path Y TCP state Validated rx packets 18



Note that there are four possible TCP states that may be displayed for a flow:

- Validated
- Validation pending
- No validation
- Unknown

Workaround

N/A