Updating firmware on individual modules using automated-workflow-system(AWS)
Article ID: 168059
Updating firmware on individual modules using automated-workflow-system(AWS)N/A
This article explains how to update firmware for a specific module through AWS
To select individual modules for firmware updates using automated workflow-menu CBS# automated-workflow-menu
Welcome to the X-Series Platform Automated Workflow System! Version: 1.0.0-48
1. Configure XOS... 2. Upgrade XOS software and firmware... 3. View system configuration and status...
Select a submenu to view available automated workflows. Enter x to exit or ? for help. select option 2
Automated Workflow Menu: Upgrade XOS software and firmware
1. Upgrade XOS software and install recommended firmware 2. Prepare system for a possible rollback 3. Install XOS firmware only 4. Roll back XOS software and firmware 5. Verify XOS software and firmware compatibility
Select a task to execute an automated workflow. Enter b to go back, x to exit or ? for help.
Please Enter Selection: select option 3
Anser Y to the next 2 questions Analyzing system configuration...
VRRP State : none CPM Redundancy Status : single Current XOS Software Release : 9.0.0-167 Would you like to continue (y/n) Y
Analyzing system firmware revisions...
np2 in slot 2: Focus_FPGA firmware requires upgrade to version 0xD. np2 in slot 2: Bootstrap firmware requires upgrade to version 188.8.131.52. np2 in slot 2: Bootloader firmware requires upgrade to version 184.108.40.206. np2 in slot 2: Diag firmware requires upgrade to version 220.127.116.11. Would you like to continue (y/n)Y
**** Select Modules menu:
1. All modules 2. All CPMs 3. All NPMs 4. All APMs 5. Specific modules x. Exit script
Select the modules on which to install firmware: :
Help: Acceptable formats include ranges such as 1-7, space- or comma-separated lists such as 1 2 7 or 1,2,7 and single numbers such as 5.
Enter the slot number of the module on which to install firmware: