ALERT: Some images may not load properly within the Knowledge Base Article. If you see a broken image, please right-click and select 'Open image in a new tab'. We apologize for this inconvenience.

How do you configure SNMP on the X-Series Platform?

book

Article ID: 168051

calendar_today

Updated On:

Products

XOS

Issue/Introduction

XOS configuration commands for SNMPN/A

Cause

Provide configuration commands for SNMP

Resolution

Example for polling the MIB:

CBS# config snmp-server community abcd1234 192.168.1.0/24

Example for sending traps:

CBS# config snmp-server host 192.168.1.31 traps version 2c abcd1234


Be sure to verify that the IP addresses are allowed in the access-lists.

Workaround

N/A