Power supply bay status on CLI

Products

• XOS

Issue/Introduction

CLI doesn't report power supply bay status on a X40 chassisCustomer runs the "show environment" command, but cannot monitor power supply bay status.

CBS# show environment
<output removed>

Power Type:
Power Type is AC

Power Supply status:
Power Supply is Operational

<output removed>

Chassis can be identified using the following command:

CBS# show chassis
Chassis status for X40:

Chassis Part Number: 003718
Chassis Serial number: F7090025
Chassis Revision: D
Chassis ocode: A000

Cause

Power supply monitoring wasn't available on the X40 chassis Part Number 003718 until Rev E.  The TDI Power Distribution Unit was modified to add DIP switches with revision E.

CBS# show chassis
Chassis status for X40:

Chassis Part Number: 003718
Chassis Serial number: F7150040
Chassis Revision: E
Chassis ocode: A000

CBS# show environment
<output removed>

Power Type:
Power Type is AC

Power Supply status:
Power Supply is Operational
Power supply Bay 1 Present
Power supply Bay 1 is Operational
Power supply Bay 2 Not Present
Power supply Bay 3 Not Present
Power supply Bay 4 Present
Power supply Bay 4 is Operational

<output removed>

Resolution

In order to monitor power supply from CLI it is necessary to use X40 chassis Part Number 003718 Rev E and above.

Workaround

N/A