What HyperTerminal settings to use to connect to the serial console

Article Id: 167243
Status: Published
Updated On: 22-10-2019 06:21
Legacy Id: TECH243070
Products:
ProxyAV Software - AVOS , Advanced Secure Gateway Software - ASG , ProxySG Software - SGOS
Issue/Introduction:

What HyperTerminal settings to use to connect to the serial console

Resolution:

To connect to the serial console, use the following HyperTerminal settings:

  • BPS: 9600
  • Data bits: 8
  • Parity: none
  • Stop bits: 1
  • Flow Control: none