How to TFTP image to PacketShaper?
Article ID: 166521
Updated On:
Products
Issue/Introduction
PacketShaper stuck in boot monitor and we do not have valid PacketWise Image on the box.
Resolution
Upload the image to the PacketShaper using TFTP (Trivial File Transfer Protocol).
1) Setup the PacketShaper in a lab environment and connect to it directly. [PacketShaper (Inside interface) ---- HUB---Workstation as TFTP server]
Both PacketShaper and Workstation IP address must be in the same subnet.
2) Source file name should be "<filename>.zoo", make that the setting of the TFTP server are correct on the Workstation.
The TFTP server I am using is "Pumpkin v2.7.2" freeware: http://kin.klever.net/pumpkin/binaries
Below is the command output during my testing, word in Bold is the user input.
================================================
Boot Monitor Menu
================================================
A. Display System Configuration
B. Browse Directory Contents
C. Browse PacketWise Images
D. Execute PacketWise Image
E. Download File via LAN (TFTP GET)
F. Upload a File via LAN (TFTP PUT)
G. Upgrade Boot Firmware
H. Recover Flash Disk (9.256)
I. Perform Hardware Reset
Monitor Selection (menu=?): E
Download file from TFTP Server
Current Directory: 9.256/
------------------------------
Enter Local (this unit's) IP Address [10.1.5.25]: 10.1.5.25
Enter Local (this unit's) Subnet Mask [255.255.255.0]: 255.255.255.0
Enter TFTP Server IP Address [10.1.5.27]: 10.1.5.27
Enter Source Filename [854G1STD.ZOO]: 854G1STD.ZOO
Enter Destination Filename [854G1STD.ZOO]: 9.258/854G1STD.ZOO
Received File: 854G1STD.ZOO (10805027 bytes)
Monitor Selection (menu=?): B
No files found.
Current Directory Specifier: 9.256/*
Enter Filename or Directory to Browse (help=?): 9.258/*
854g1std.zoo 7:19 21-Jun-2010 10805027
Current Directory Specifier: 9.258/*
Enter Filename or Directory to Browse (help=?): 9.258/854g1std.zoo
Name: 854g1std.zoo
Size: 10805027 bytes (Binary)
Date: Mon Jun 22 07:19:26 2010
Current Directory Specifier: 9.258/*
Enter Filename or Directory to Browse (help=?):
Monitor Selection (menu=?): ?
================================================
Boot Monitor Menu
================================================
A. Display System Configuration
B. Browse Directory Contents
C. Browse PacketWise Images
D. Execute PacketWise Image
E. Download File via LAN (TFTP GET)
F. Upload a File via LAN (TFTP PUT)
G. Upgrade Boot Firmware
H. Recover Flash Disk (9.256)
I. Perform Hardware Reset
Monitor Selection (menu=?): D
Execute PacketWise Image
------------------------
Enter Image File Path [DEFAULT]: 9.258/854g1std.zoo
Loading.................................................................................................................
.....................................................................................
PacketShaper (console)
loading configuration....
Password:
Feedback
