Finding OIDs for Edge Secure Web Gateway (formly ProxySG)

Products

• ProxySG Software - SGOS
• ASG-S500

Issue/Introduction

Using the ProxySG appliance and requests the method to extract OID information of the ProxySG.

Resolution

The best place to get the actual OID¹s is to read the MIB files.  Download a MIB browser from the available Internet resources to read the MIB files. 

 

The example shown below is iReasoning MIB browser:

1. Download and Install iReasoning MIB Browser (https://www.ireasoning.com/download.shtml)
2. File > Load MIBs: Select the MIBs files you need
   1. Address: Your Proxy IP address
   2. Advance: Specify the Read Community, Write Community, and SNMP Version according to your ProxySG setting

                            To find the SNMP Community, log into Proxy's CLI terminal:  

                                        Blue Coat SG-VA Series# show snmp

                    3. Operation: Walk

   

 

Search for the names from the listed MIB Tree, and the OID will be shown in the table. For example:

SGOSV4:  memPressureValue - OIDs: 1.3.6.1.4.1.3417.2.8.2.3 (systemResourceMIB)