How to delete installed systems on the proxy?

Products

• ProxySG Software - SGOS

Issue/Introduction

Deleting an operating system from the ProxySG has to be done via the command line, it cannot be done via the GUI

 

Once in configuration mode, enter the following commands :

To view the installed systems and their numbers :   installed-systems    then type in    view

Example output (notice the system number showed un blue) :

10.78.1.50 - Blue Coat SG200 Series#(config)installed-systems
10.78.1.50 - Blue Coat SG200 Series#(config installed-systems)view
ProxySG Appliance Systems
1. Version: SGOS 4.2.8.6, Release ID: 35252
   Wednesday July 16 2008 22:53:29 UTC,
   Attributes: None
   Boot Status: Last boot succeeded, Last Successful Boot: Thursday February 12 2009 17:27:50 UTC
2. Version: SGOS 5.3.2.1, Release ID: 36839
   Thursday November 20 2008 01:48:28 UTC,
   Attributes: None
   Boot Status: Last boot succeeded, Last Successful Boot: Wednesday April 1 2009 21:30:32 UTC
3. Version: SGOS 4.2.9.1, Release ID: 36344
   Saturday October 11 2008 08:17:22 UTC,
   Attributes: None
   Boot Status: Last boot succeeded, Last Successful Boot: Monday December 15 2008 21:14:37 UTC
4. Version: SGOS 5.3.1.9, Release ID: 36410
   Friday October 17 2008 08:30:48 UTC,
   Attributes: None
   Boot Status: Last boot succeeded, Last Successful Boot: Thursday February 12 2009 18:01:00 UTC
5. Version: SGOS 5.4.1.3, Release ID: 38863
   Wednesday April 15 2009 09:49:34 UTC,
   Attributes: None
   Boot Status: Last boot succeeded, Last Successful Boot: Thursday June 4 2009 19:00:48 UTC
Default system to run on next hardware restart: 5
Default replacement being used. (oldest unlocked system)
Current running system: 5
Enforce signed: Disabled

 

To delete a system, type in    delete #     (where # is the system number)

10.78.1.50 - Blue Coat SG200 Series#(config installed-systems)delete 1
Are you sure you want to delete system 1? (y or n)y