How to add IPv6 IP address on Cacheflow Interface?

Products

• CF-5000
• CF-500

Issue/Introduction

  

This could be done via SSH/CLI command:

 

CacheFlow#conf t

CacheFlow#(config) interface adapter_number:interface_number

CacheFlow#(config interface adapter_number:interface_number) ip-address ip-address [subnet mask for IPV4 or prefix length for IPV6]

 

Note: You could assign an Ipv4 and IPv6  on  Cacheflow Interface.    The maximum number of addresses you can add per family is 64; you can assign 64 IPv4 and 64 IPv6 addresses to an interface for a total of 128 addresses.