How do I flush the ARP cache on a ProxySG(Edge SWG)?
Article ID: 166120
Updated On:
Products
ProxySG Software - SGOS
Issue/Introduction
How do I flush the ARP cache on the ProxySG(Edge SWG)?
Resolution
Flushing or clearing the ARP cache on the ProxySG(Edge SWG) is available through the CLI only.
The following CLI commands will flush the ARP cache:
ProxySG>enable
Enable Password:
ProxySG#clear-arp
ok
ProxySG#
Feedback
Yes
No
Powered by
