Delete the SSL certificate cache without rebooting the ProxySG appliance
Article ID: 166057
Updated On:
Products
ProxySG Software - SGOS
Issue/Introduction
In the following article, we will describe the steps needed to clear the SSL certificate cache without requiring a reboot.
Resolution
Enter the following CLI commands to clear the certificate cache on the ProxySG appliance.
ProxySG#conf t
Enter configuration commands, one per line. End with CTRL-Z.
ProxySG#(config)ssl
ProxySG#(config ssl)clear-certificate-cache
The clear-certificate-cache is actually a hidden command so you won't be able to get help on the command, you will, however, see an OK message after executing the command.
You can confirm that the cache has been cleared by going to the following URL:
https://<proxyip:port>/sslproxy/certcache
Feedback
Yes
No
Powered by
