Does the ProxySG appliance have a CLI command to terminate active sessions?

Products

• ProxySG Software - SGOS
• ASG-S200
• SG-S200
• SG-S400
• SG-S500

Issue/Introduction

The ProxySG appliance does have the CLI command to terminate active session(s) starting with SGOS 7.3.6.1

Resolution

Prior to 7.3.6.1, To terminate active sessions, you must select sessions one-by-one and terminate them. In the Management Console, select Statistics > Sessions > Active Sessions. Select a session and click Terminate Session.

In 7.3.6.1 and later you can use the following commands

# active-sessions <session_type> {list | terminate} <filter>

where:

• <session_type> specifies the type of active session:
  • adn-inbound
  • bypassed-connections
  • proxied-sessions
• list: Displays a list of connections or sessions of the specified type and filter(s)
• terminate: Terminates connections or sessions of the specified type and filter(s); not applicable to bypassed connections
• <filter> specifies one or more of the following connections or sessions to list or terminate:
  • all: All connections or sessions
  • client-address=<IP_address>: Requests from the specified client address
  • client-port=<port_number>: Requests from the specified client port
  • errors={active|all}: Active errored sessions, or all errored sessions
  • limit=<maximum_number_of_entries>: Number of sessions to display in output; by default, 20 are listed
  • proxy=<proxy_type>: Proxy type such as "TCP Tunnel" or "HTTP"
  • service=<service_name>: Service name such as "External HTTP" or "Default TCP"
  • server-address=<IP_address_or_hostname>: Responses from the specified server address
  • server-port=<port_number>: Responses from the specified server port