Configuring the ProxySG to upload access logs to two different locations

Products

• ProxySG Software - SGOS

Issue/Introduction

Configuring the ProxySG to upload access logs to two different locations

Resolution

Note: Repeat the process below if wanting other logs to go to different locations.

1.  Login to the ProxySG Management Console (https://<ip.address.of.proxysg>:8082/ ) > Configuration tab > Access Logging > Logs.  Click on the "New" button and enter a name, such as SecondLog.  Select the desired format and then click "Apply".
2.  Go to "Upload Client" tab.  Under "log" use the drop down arrow and select the new log created (ex. SecondLog) Under "upload client" field select FTP client and input the FTP information.  Click "Apply" and make sure the ProxySG successfully saved the changes.
3.  Go back to Management Console > Configuration tab > Policy > Visual Policy Manager > Launch.  Select Policy menu and add a "Web Access Layer".  Rename the layer to something meaningful.  Under the "Action" field right click > Set > New > select "Modify Access Logging" and give it a meaningful name.  Select "Enable logging to".  Use drop arrow to select new log created (ex. SecondLog). Click OK.
4.  Click on the Install Policy button and the new access log will be up and running.