Why do I have an apply check failing under CSM?

Products

• Mainframe Software Manager (Chorus Software Manager)

Issue/Introduction

I am working on the installation of CA Common Services r14.1 with CSM.

In CSM, during the APPLY CHECK process I am receiving below error:

APPLY
SELECT(RO91406,RO94761,RO95930,RO96006,RO96057,RO96092,RO96371,
RO96451,RO96467,RO96513,RO96566,RO96886,RO97006,RO97125,RO97189,
RO97199,RO97307,RO97512,RO97611,RO97764)
CHECK
GROUPEXTEND(NOAPARS,NOUSERMODS) .
 
GIM30206E ** APPLY PROCESSING FAILED FOR SYSMOD RO94761. HOLD REASON IDS WERE NOT RESOLVED.
GIM35965I SYSTEM HOLD ACTION ORIGINATED BY SYSMOD RO94761 WAS NOT RESOLVED.
GIM30206E ** APPLY PROCESSING FAILED FOR SYSMOD RO96467. HOLD REASON IDS WERE NOT RESOLVED.
GIM35906I PREREQUISITE SYSMOD RO94761 WAS HELD.
GIM30206E ** APPLY PROCESSING FAILED FOR SYSMOD RO97006. HOLD REASON IDS WERE NOT RESOLVED.
GIM35906I PREREQUISITE SYSMOD RO94761 WAS HELD.
GIM30206E ** APPLY PROCESSING FAILED FOR SYSMOD RO97189. HOLD REASON IDS WERE NOT RESOLVED.
GIM35906I PREREQUISITE SYSMOD RO94761 WAS HELD.
GIM30206E ** APPLY PROCESSING FAILED FOR SYSMOD RO97512. HOLD REASON IDS WERE NOT RESOLVED.
GIM35965I SYSTEM HOLD DDDEF ORIGINATED BY SYSMOD RO97512 WAS NOT RESOLVED.
GIM30206E ** APPLY PROCESSING FAILED FOR SYSMOD RO97764. HOLD REASON IDS WERE NOT RESOLVED.
GIM35965I SYSTEM HOLD ACTION ORIGINATED BY SYSMOD RO97764 WAS NOT RESOLVED.
GIM35906I PREREQUISITE SYSMOD RO94761 WAS HELD.
GIM35907I PREREQUISITE SYSMOD RO97189 FAILED.
GIM41802I JCLIN PROCESSING WAS SUCCESSFUL FOR SYSMOD RO91406.
GIM54701E ** ALLOCATION FAILED FOR CAW0ZFS1 - IKJ56228I PATH /cai/CASoftware/CCS/uss/CA/ NOT IN CATALOG OR CATALOG CAN
NOT BE ACCESSED.
GIM28307E ** ALLOCATION FAILED FOR CAW0ZFS1, WHICH IS REQUIRED IN ORDER TO PROCESS ELEMENT ESMJAR IN SYSMOD RO96371.
GIM39307I ALLOCATION FAILED FOR CAW0ZFS1, WHICH IS REQUIRED IN ORDER TO INVOKE SHELL SCRIPT ESMSH FOR HFS ESMJAR IN
SYSMOD RO96371.
GIM39307I ALLOCATION FAILED FOR CAW0ZFS1, WHICH IS REQUIRED IN ORDER TO INVOKE SHELL SCRIPT ESMSH FOR HFS ESMLG4J2 IN
SYSMOD RO96371.
GIM22601I APPLY PROCESSING FAILED FOR SYSMOD RO96371.
GIM20501I APPLY PROCESSING IS COMPLETE. THE HIGHEST RETURN CODE WAS 08.

Why do I have an apply check failing under CSM?

Environment

CSM 5.1 - Common Services 14.1 -

Resolution

In older build levels of CSM if a groupextend is done CSM will not do the bypass.

They are given a screen where they have to code the BYPASS. They may have skipped over it.
If you do an apply check without the groupextend CSM should resolve it.

So you have to redo the apply through CSM:
On the first option displayed on the wizard there is a groupextend checkbox. You should not check it off, leave it unchecked. You will have to redo it under CSM.