Set the logging levels for DLP Network Discover

book

Article ID: 160664

calendar_today

Updated On:

Products

Data Loss Prevention Network Discover Data Loss Prevention

Issue/Introduction

There are two methods for setting the logging level for Symantec Data Loss Prevention (DLP) Network Discover.

 

Resolution

To set logging levels for Discover through config file: 

  1. Go to the \Program Files\Symantec\DataLossPrevention\DetectionServer\15.X.00000\Protect\config folder. 
  2. Add the following lines to the FileReaderLogging.properties file:
    java.util.logging.FileHandler.level = FINEST
    java.util.logging.FileHandler.limit = 10000000
    java.util.logging.FileHandler.count = 16
    com.vontu.filescan.RawFileInductor.level = FINEST
    com.vontu.detection.logging.DetectionLogHandler.level = FINEST
    com.vontu.discover.logging.DiscoverLogHandler.level = FINEST
    com.vontu.discover.logging.DiscoverTraceLogHandler.level = FINEST
    com.vontu.detection.level = FINEST
  3. Restart the Discover Server for the settings to take effect.

 

To set logging levels for Discover through Enforce U/I: 

  1. Go to system > servers and detectors > logs and select the configuration tab.
  2. Select the discover server and under the diagnostic log setting, choose the option "discover trace logging".
  3. Select configure logs and restart the discover server for changes to take effect.