BSOD: stop code 0x0000007B
search cancel

BSOD: stop code 0x0000007B


Article ID: 152286


Updated On:


Deployment Solution


After deploying an image, when the computer tries to boot to production to do post configuration, it blue screens with a stop code 0x0000007B.


There is a hardware conflict that is incompatible with the image that is being pushed. This is not allowing the newly imaged computer to boot to production and is causing the blue screen.

In this instance, a bad image file was sent from the hardware manufacturer which was incompatible with the hardware. But the issue could occur with a locally captured image as well.


Option 1: Capture an image from the same hardware and deploy that image.

Option 2: It also may be possible to deploy the incompatible image with DeployAnywhere.

 Option 3: Change BIOS SATA controller mode settings under the Advanced menu from AHCI to Compatibility mode. For further details, please click on the following link:

Applies To

All versions of Deployment Solution


Error_07b.gif get_app
CompatibilityMode_BIOS.jpg get_app