Abort: code 503, Connection timed out with Ghost error code 19945 when using a Marvel Yukon network adapter

Products

• Ghost Solution Suite

Issue/Introduction

Symptoms
When using the Ghost Solution Suite 2.5 to create an image using the default "DOS Universal Packet Driver" on a computer containing a Marvel Yukon network adapter, the following error message is received:

Abort: code 503, Connection timed out with Ghost Code 19945

This error may appear after the creation process has achieved 30% or more.

Resolution

To resolve this issue, try the following:

1. Be sure you are using the correct driver from the Ghost Templates for the Marvel Yukon adapter for your Console Task.
2. Download the latest NDIS 2 drivers from Marvel.
   "Marvell: Yukon Gigabit Ethernet Adapters" at:
   http://www.marvell.com/products/pcconn/yukon/index.jsp
   
   
3. Create a new DOS Template for this driver through the Ghost boot wizard, by following the directions in the below document:
   "Adding or modifying NIC templates in the Ghost Boot Wizard" at:
   http://service1.symantec.com/support/on-technology.nsf/docid/2000011211551725