Procedure to upgrade CA CSM to the latest build.

Products

• CA Mainframe Software Manager (Chorus Software Manager)

Issue/Introduction

What is the procedure to upgrade CA CSM to the latest build?

Environment

Release: MSMNGR00200-5.1-Chorus Software Manager
Component:

Resolution

To upgrade CA CSM to it’s latest build first perform a get latest maintenance for the CA CSM product from the products tab. Right click on release 6.0 or 6.1 of CA CSM then click get latest maintenance:

<Please see attached file for image>

src="/servlet/servlet.FileDownload?file=0150c000004AKWzAAO" alt="snag100.png" width="1010" height="696">

After that task is done, click the SMP/E Environment tab and locate the CSM CSI. Click the name of the CSI:

<Please see attached file for image>

src="/servlet/servlet.FileDownload?file=0150c000004AKX0AAO" alt="snag101.png" width="1010" height="252">

Click the maintenance tab:

<Please see attached file for image>

src="/servlet/servlet.FileDownload?file=0150c000004AKX1AAO" alt="snag102.png" width="1010" height="435">

Check off the filter check box:

<Please see attached file for image>

src="/servlet/servlet.FileDownload?file=0150c000004AKX5AAO" alt="snap103.png" width="1005" height="360">

Click the drop down window for the function column:

<Please see attached file for image>

src="/servlet/servlet.FileDownload?file=0150c000004AKX6AAO" alt="snap104.png" width="1013" height="281">

Select the CEGP600 FMID. This is for CA CSM 6.0 ( for 6.1 the FMID is CEGP610 ) and will list all the PTF’s for CA CSM. These are the build level PTF’s:

<Please see attached file for image>

src="/servlet/servlet.FileDownload?file=0150c000004AKX7AAO" alt="snap105.png" width="1006" height="335">

 

The example below shows that the highest build applied to this CA CSM is 143 and there is a 146 available.

<Please see attached file for image>

src="/servlet/servlet.FileDownload?file=0150c000004AKX2AAO" alt="snag106.png" width="1010" height="396">

To check the current build click the about button in the lower left corner:

<Please see attached file for image>

src="/servlet/servlet.FileDownload?file=0150c000004AKX3AAO" alt="snag107.png" width="993" height="463">

This shows the build:

<Please see attached file for image>

src="/servlet/servlet.FileDownload?file=0150c000004AKX4AAO" alt="snag108.png" width="853" height="642">

After applying the latest build run MSMDEPLY in the .JCL PDS to deploy the maintenance to the runtime datasets and directories.