Is there a way I can disable the MPLS/LSP models from being generated under the Spectrum MPLS Transport Manager?

book

Article ID: 14721

calendar_today

Updated On:

Products

CA Spectrum

Issue/Introduction



The Spectrum MPLS Manager is installed by default but I do not want to use it. Is there a way I can disable the MPLS/LSP models from being generated under the Spectrum MPLS Transport Manager?

Environment

Release: a7n0c000000PBNr
Component:

Resolution

Doing the following will prevent the MPLS Transport Manager from modeling any MPLS models:

1. Log into OneClick as an ADMIN user

2. Find and select the MPLS Transport Manager model

3. Click on the Information tab

4. Find and expand the Configuration -> LSP Discovery subview

5. Set all of the following to "No":

Create LSP on Trap

Delete LSP on Trap

Update LSP on Trap

Enable Port Polling

6. Set the "Path Filter Type" to Exclusive

7. In the "Path Filter" section, click on the blue Add link and add a single "*" character as the filter and click on the OK button

<Please see attached file for image>

770758_1.png

 

Additional Information

Please reference the "MPLS Transport Manager" section of the Spectrum documentation for more information on Spectrum's MPLS Transport Manager.

https://docops.ca.com/ca-spectrum/10-3-0/en/managing-network/mpls-transport-manager

Attachments

1558693035493000014721_sktwi1f5rjvs16h69.png get_app