APM Infrastructure Agent Disk PercentUsed metric is not reported

Article Id: 144488
Status: Published
Updated On: 05-02-2020 17:38
Products:
CA Application Performance Management Agent (APM / Wily / Introscope) , CA Application Performance Management (APM / Wily / Introscope) , INTROSCOPE , DX Application Performance Management
Issue/Introduction:

When installing the apmia agent in the server of the company, but the following metric does not appear

*SuperDomain*|<host>|Infrastructure|Agent|SystemEdge|<host>|Storage|Disk partition /dev/mapper/vg00-lv_home-/home:PercentUsed


Agent do not report this metric in Linux nor windows:  PercentUsed

 

How to configure the agent to get it?

 

Cause:

The metric is not reported on Windows as documentation specifically mentions Linux for it

(Linux)

 Storage|StorageName|PercentUsed
 
The percentage of used blocks, obtained by dividing Used (Blocks) by Size (Blocks)

Environment:

Release : 10.7.0 GA (build 45)

Component : APM Agents

Resolution:

The Infrastructure Agent needs to be upgraded to 10.7 SP3 (build 197) or higher to have this metric on Linux. The agent service pack is supported to be higher than the Enterprise Manager version.

Additional Information:

http://techdocs.broadcom.com/content/broadcom/techdocs/us/en/ca-enterprise-software/it-operations-management/application-performance-management/10-7/implementing-agents/infrastructure-agent/host-monitoring/host-monitoring-metrics.html