USS parameter group fails to initialize in Netmaster
Article ID: 144369
Updated On:
Products
Issue/Introduction
The USS parameter group fails to initialize. Messages:
The JESMSGLG shows
IAIN0167 (NETMSTR) parameter group $NM USS failed. Error message follows
IAIN0133 Parameter group $NM USS action failed, proc=$NMINWIZ RC=8
IAIN0143 (NETMSTR) Initialization failures have occurred
The activity log shows
IAIN0126 Processing for parameter group $NM USS started
N12804 SYSPARMS UNIXDBUG=NO OPERAND ACCEPTED.
IPDI5200 TCP/IP Details for NMMV1 using IBM z/OS Communications Server
IPDI5270 Checking UNIX System Services Interface for NETMSTR
BAINWI49 Region user NETMSTR has OMVS home /u/netmstr
BAINWI50 INVALID OMVS HOME DIRECTORY: NOT FOUND
IPDI5272 Checking access to /tmp using /tmp/netmaster.unix.testpath.NETMSTR
IPDI5276 Access to /tmp verified successfully
N2U305 UNIX server initialisation complete, PID=1792 PARMS=NODEBUG,P=/tmp/netmaster.unix.0
174,A=OMVSAPPL,ZFSP=/u/netmaster/NMv122
IPDI5273 UNIX environment established using USS interface
IPDI5278 Error: UNIX SEND failed, RC/FDBK=8/10, reason=Environment disconnected
IPDI527Z
IPNS0806 UNIX shell request RECEIVE has failed due to Environment disconnected
IAIN0133 Parameter group $NM USS action failed, proc=$NMINWIZ RC=8
Environment
Release : 12.2
Component : CA NetMaster Network Management for TCP/IP
Cause
Resolution
Possible causes:
1) The OMVS HOME directory, eg. /u/netmstr, must be permanently mounted in the BPXPRM and available on the system where Netmaster is running.
2) The OMVS HOME directory, eg. /u/NETM, has not been defined
If neither of these applies, please contact support and supply the complete output from the Netmaster task.
Feedback
