Ca Datacom Server: User cannot connect to the server region from their PC DSV00134I Protocol

book

Article ID: 144019

calendar_today

Updated On:

Products

CA Datacom CA Datacom - AD CA Datacom/DB CA Datacom/AD CA Datacom/Server

Issue/Introduction

CA Datacom Server is being upgraded to R15.0.  The user is attempting to connect to the server using the R15.0 client.  This is the first attempt to connect to a server in the sandbox environment and the suspicion is TCP is not set up correctly. 

Cause

DSV00134I-Protocol = CCI entered TCPIP options ignored.
DSV00049I-CA Datacom Server Version 15.0 Initialized-#DB_SERVER

Environment

Release : 15.0

Component : CA DATACOM SERVER

Resolution

"DSV00134I-Protocol = CCI entered TCPIP options ignored"

CCI is the default so if you want to use TCP/IP, add the Datacom Server startup option: PROTOCOL=TCP or PROTOCOL=BOTH

 

From the Documentation:

**********************************************************

From CA DATACOM TOOLS 15.1 section "Working With CA Datacom Server (15.0) topic "Input Parameters":

PROTOCOL=
Specifies the communication protocol that is used to transmit data between workstations or client applications and the Mainframe Server.

If CCI is specified, the native TCP/IP protocol (z/OS only) will not be available. All other TCP/IP parameters are ignored.

If TCP is specified, the native TCP/IP interface is initialized (z/OS only). TCPIP_PORT, TCPIP_HOST, and TCPIP_CONNECT_QUEUE can be specified or the defaults are used. See those options for their defaults. No CCI communications are allowed or seen by the Mainframe Server when using the CA Datacom Server Communication Utility (SVCOMPR) to issue commands, such as EOJ or STATUS as documented in PDC RI66876.

If BOTH is specified, both CCI and the native TCP/IP interface are initialized (z/OS only). TCPIP_PORT, TCPIP_HOST, and TCPIP_CONNECT_QUEUE can be specified or the defaults are used. See those options for their defaults. Both CCI and TCP/IP communication protocol can be used.

Either BOTH or TCP keywords are required to be able to use a JDBC Type 4 driver connection.

Valid Entries: CCI, BOTH, TCP
Default: CCI

*********************************************************

 

Additional Information

Please be sure to check all the startup up options in our documentation for further detail on how each parameter is supposed to be configured. Click Here