GIM24801W NO SYSMODS SATISFIED with XCOM for z/OS

Products

• XCOM Data Transport
• XCOM Data Transport - z/OS
• XCOM - SUPPORT

Issue/Introduction

There were problems when receiving the CARS1911 file. We followed the instructions  Using CARS without CA CSM.  

Previously we received all HOLDDATA (2019) successfully. The message is:

 

GIM24801W NO SYSMODS SATISFIED THE OPERANDS SPECIFIED ON THE RECEIVE COMMAND.

Environment

XCOM Data Transport for z/OS 12.0

Cause

All instructions were not followed

Resolution

NOTE: This resolution applies to all CARS levels.  The CARS1911 file was used as a example.

It is important to follow ALL instructions at Using CARS without CA CSM

Specifically:

1. Making sure to create a ZIP including all XCOM 12.0 PTFs (starting from the first PTF after RO99935) 
2. Then doing GETs for all CARyymm.TXT between 1803 and 1911
3. Then running steps 3 and 4 on the mentioned link.

This worked once CCS r14.1 PTF SO08328 was applied and  CAUNZIP re-run (review CA Unzip Utility link found on the above link).