Is it normal for a CMDB Connector for z/OS region to have an UDP port connection shown as open?

Products

• CMDB for z/OS

Issue/Introduction

While a CMDB Connector for z/OS region is running an UDP port connection can be shown as open while the

product region is up.  Is it normal for a CMDB Connector for z/OS region to have an UDP port

connection shown as open?

Environment

OS:  z/OS.

Cause

-

Resolution

If the region's /PARMS group SOCKETS (2nd screen) parm Domain Name Resolution--Use DNR Provided By

has value = SOLVE the UDP port connection is allocated and stays open.

 

When you specify a SOLVE DNR it basically opens up a UDP connection to the DNR servers whereby

those DNR servers communicate back to SOLVE DNR stats/paths/etc. 

Additional Information

1     Example--command issued on the CMDB Connector for z/OS region:

SH SOCKETS
N3AF05 TCP/IP INTERFACE IS ACTIVE NAME=SOCKETS PRIMARY=YES IPVERS=4
N3AF03 SOCKET TYPE OWNER CLIENTID LPORT PPORT PEER-IP-ADDRESS
N3AF40 SERVER-NAME
N3AF41 ------ ---- -------- -------- ----- ----- ------------------------------
N3AF04 000057 TCPL 000056 00000001 8181 - -
N3AF04 000058 TCPI 000056 - - - -
N3AF04 000049 UDP DNR 00000000 30792 - -
N11907 *END*                

2     Documentation for the product can be found at this location:  CA CMDB Connector for z/OS 2.0